Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry Doors in Sarasota, FL
Our Replacement Doors in Sarasota typically run between $1,200 and $4,800 installed, depending on material, glass configuration, and whether the frame and sill need rebuilding after years of Florida humidity. Most standard single-door replacements are completed in a single visit, with the old unit out and the new one set, sealed, and hardware-tested the same day. If you’d like a straight answer on what your specific opening will take, call us at (941) 214-2069 – a live person picks up every time, around the clock.
At TruePane Windows & Doors, our Door Installation services are not a sideline to our window work. They’re the part of the house Dale Kessler talks about first when a homeowner calls, because an out-of-plumb entry door frame or a compromised sill plate tells us everything we need to know about how the rest of the job will go. After more than 42 years of serving the greater Sarasota area, we’ve set and registered enough doors to know that a proper install lives or dies at the rough opening – not at the showroom.
This page covers everything specific to entry door replacement in Sarasota: what signs tell you it’s time, how we handle the job from measure to warranty registration, what the pricing honestly looks like in this market, and what questions homeowners ask us most. If you want the broader picture of everything we do with doors, start at our Door Installation in Sarasota page.
When You Need an Entry Door Replacement
Some of these are obvious. Others take a closer look – and in Sarasota’s climate, they move faster than homeowners expect.
- The door binds in summer and rattles in winter. Sarasota’s humidity swings from the dry season into mid-summer saturation. A wood or older fiberglass door that binds badly in July and gaps noticeably in February has lost its dimensional stability. Planing buys a season, not a solution.
- You can feel outdoor air at the threshold or corners. A bad sweep or a sill that’s settled out of level will let conditioned air escape year-round. In the Palmer Ranch and Gulf Gate neighborhoods, we regularly find doors where the sill has dropped a quarter-inch or more over 20 years – enough to let insects and humidity straight in.
- The door frame shows soft spots, staining, or visible rot. Sarasota’s salt air and afternoon rains accelerate wood deterioration at the bottom of door frames. Soft wood at the sill or side jamb usually means the rot has already moved inward – cosmetic patching won’t hold.
- Your door does not meet current Florida Building Code for impact resistance. If your home has never had its entry door upgraded to a Florida Product Approved impact-rated unit, you may be carrying wind-load liability you don’t know about. PGT and CGI both manufacture entry systems rated for Sarasota County’s wind zone requirements.
- The hardware is original from before 2000. Older deadbolt and latch geometry on a door that’s settled or shifted means the bolt may no longer engage squarely in the strike plate. That’s a security problem, and on a door that’s warped or racked, new hardware alone won’t fix it.
- The glass panels are fogged, cracked, or single-pane. If your entry door has sidelights or a decorative insulated glass unit that’s gone hazy, that failed seal is raising your cooling load every month. In Sarasota, a fogged sidelight isn’t just cosmetic – it’s costing you money from April through October.
Our Entry Door Process
We put the same care into a single entry door replacement that we put into a full window project. Here’s how a standard job runs from first call to warranty registration.
- On-site measure and condition assessment. We come to you – no charge for the estimate. We measure the rough opening, check the sill plate and sub-sill for moisture damage, confirm the framing is plumb and square, and look at the threshold condition and surrounding masonry or stucco for any signs of water intrusion that need addressing before the new door goes in. We don’t quote off a phone description.
- Side-by-side product recommendations on paper. Based on your opening, your home’s architecture, your energy goals, and your budget, we pull two or three manufacturer lines – Therma-Tru fiberglass, PGT impact series, or CGI impact entry systems, depending on what fits – and quote them side by side in writing. You see the unit cost, the installation cost, and both warranty layers before you decide anything.
- Old door and frame removal. We protect your floors and surrounding finish before we start. The old unit comes out, we inspect what’s underneath, and if we find rot, soft framing, or a sill plate that needs work, we tell you before we proceed – not after the new door is already in the opening.
- Frame prep, shimming, and setting. This is where a 42-year craft tradition matters. The new frame goes in plumb, level, and square – measured twice, set once. Shimming is done in the right places to hold the geometry over time, not just to make the door close today. Flashing and sealant are applied to manufacturer spec for Florida conditions.
- Hardware installation and operation test. We install the deadbolt, latch set, and any multipoint hardware, test the door through its full range of motion, and adjust the strike plates until the engagement is clean. We also walk you through the operation – including any adjustments specific to how the door interacts with Sarasota’s thermal expansion cycle.
- Warranty registration before the truck leaves. Both manufacturer warranty layers – product and finish – are registered in writing with the manufacturer before we pull out of the driveway. Durations are stated on paper and left with you. That’s The Keystone Standard, and it’s how every TruePane job closes.
Entry Doors Pricing in Sarasota
Entry door replacement in Sarasota ranges more than most homeowners expect, primarily because the condition of what’s behind the existing door varies so much in homes built between the 1970s and early 2000s – which covers most of the housing stock in areas like Bee Ridge, Fruitville, and Siesta Key. The table below reflects what we actually see in the Sarasota market.
| Door Type | Typical Installed Range (Sarasota) | Notes |
|---|---|---|
| Standard fiberglass single door (Therma-Tru) | $1,200 – $2,400 | Includes basic hardware; frame in good condition |
| Impact-rated single entry door (PGT or CGI) | $1,800 – $3,200 | Florida Product Approved; required in many Sarasota zones |
| Double entry door (fiberglass or steel) | $2,400 – $4,200 | Wider rough opening work; more hardware |
| Entry door with sidelights or transom | $2,800 – $4,800+ | Glass configuration adds unit and labor cost |
| Frame repair or sill replacement (if needed) | $180 – $650 added | Assessed on-site; quoted before work begins |
A few things move the number up or down in a real Sarasota job:
- Impact rating. Sarasota County falls in a high-velocity hurricane zone in several areas. If your home requires or would benefit from a Florida Product Approved impact door, expect to start at the higher end of the fiberglass range. The difference in unit cost is significant, but so is what you’re buying.
- Sill and frame condition. This is the variable that surprises people most. A door frame that looks fine from the outside can have serious rot at the bottom jamb after 25 Florida summers. We quote the door and disclose what we find in the opening – we don’t absorb surprise discoveries into the labor bill without telling you first.
- Hardware and finish selection. Entry lever sets, deadbolts, and multipoint lock systems vary considerably in price. We stock mid-grade and bring options, but if you want a specific brand or finish to match existing hardware in your home, we’ll source it.
- Glass and decorative elements. Clear, privacy, and decorative glass lites all come at different price points. Impact-rated decorative glass costs more than standard decorative glass – and in Sarasota, that distinction matters for code compliance.
Seniors and veterans receive a permanent 5% discount on every job. If your repair portion runs over $250, ask about the $50 off repair offer as well. Estimates are free, upfront, and in writing – no line items appear on the final bill that weren’t on the quote. Call (941) 214-2069 to schedule yours.
FAQs – Entry Doors in Sarasota
How long does an entry door replacement take in Sarasota?
Most standard single-door replacements take four to six hours from removal to hardware test, and we complete them in a single visit. French & Double Doors with sidelights or a frame that needs repair work may run a full day. We tell you the expected duration when we quote the job, and we don’t leave an opening unsecured overnight. If you need to know whether we can get to your home this week, call (941) 214-2069 – someone answers every time, and we’ll give you a straight answer on scheduling.
Do I need an impact-rated entry door in Sarasota County?
In many parts of Sarasota County, Florida Building Code requires that Hurricane-Proof Front & Entry Doors meet Florida Product Approved wind-load standards, particularly in homes that have had other impact upgrades or in Wind-Borne Debris Regions that cover coastal and near-coastal neighborhoods. The short answer: if you’re replacing the door anyway, putting in a non-impact unit when an impact unit is required creates a code and insurance issue. We check code applicability for your address as part of every estimate – no guessing on your end required.
Is it better to repair my current entry door or replace it?
If the door itself is structurally sound – no delamination, no core rot, hinges holding square – and the problem is limited to weatherstripping, a worn threshold, or an adjustable strike plate, repair is the right call and often costs a fraction of replacement. Our $50 Off Any Repair Over $250 offer applies to those jobs. But when the frame has rot, the door has lost its shape from humidity cycling, or the glass units have failed, repair is borrowing time on a system that will need replacement within a few years anyway. We’ll tell you honestly which category your door falls into after we look at it – we don’t push replacement if repair is the right answer for your situation.
What entry door brands does TruePane install?
We’re authorized installers for more than a dozen manufacturer lines. For entry doors specifically, we most frequently work with Therma-Tru fiberglass systems, PGT impact entry doors, and CGI impact series units – all of which have strong track records in Florida’s coastal climate conditions. We quote applicable lines side by side on paper so you can compare unit cost, warranty duration, and glass options before making any decision. The manufacturer and the finish warranty are both registered in writing before we leave the job site, regardless of which line you choose.
Why Sarasota Homeowners Call TruePane First
The short version: we’ve been here long enough to know what Sarasota does to doors, and we stand behind every install in writing.
Dale Kessler started TruePane in 2008 on a principle that’s simple enough to fit on a whiteboard: if the pane is not true, the job is not done. That rule applies to every entry door we set, because a door that doesn’t sit square in its opening will bind, leak, and fail hardware ahead of schedule – and a warranty that nobody registered won’t help you two years later when something goes wrong.
Our technicians are background-checked, uniformed, and trained through our own apprentice-to-journeyman program. When we’re in your home, we work the way we’d work in a family member’s house – floors protected, work area cleaned before we leave, no tools left on the sill. The 90-Day Done Right Promise covers every job: if something isn’t right after we leave, we come back and make it right. No paperwork fight, no argument about whether it’s covered. That’s what “done right” means in writing.
We’ve helped homeowners across Sarasota – from the older ranch homes along Tuttle Avenue to the canal-side properties in Southgate and the newer builds coming up in Lakewood Ranch – get their entry doors set correctly the first time. The work speaks. We back it with a warranty on paper.
You can read more about our full scope of door services on our home page or explore every door type and situation we handle through our Door Installation in Sarasota page.
Schedule Your Free Entry Door Estimate
If your entry door is binding, leaking air, showing rot, or simply due for an upgrade after 20-plus years in Sarasota’s climate, the right next step is a free on-site estimate. We measure your opening, tell you what we find, and quote the job in writing before you make any decision. Call (941) 214-2069 – a live person answers day or night, and we’ll get you scheduled at a time that works.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sarasota.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After