Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Sarasota, FL | TruePane Windows & Doors
Geometric and shaped windows bring architectural character to a home, but in Sarasota, a beautiful window is only as good as its hurricane rating. We’re TruePane Windows & Doors, and we fabricate and install triangular, hexagonal, octagonal, arched, and custom-curved impact windows that hold up to Florida’s wind-zone demands. Whether you’re building a coastal contemporary in Bird Key, restoring a Mediterranean in Cherokee Park, or adding a statement window to a home in Palmer Ranch, we build each unit to your exact opening and engineer it for HVHZ compliance. Call (941) 214-2069 to schedule a free on-site measurement and quote.
Product Overview - Geometric & Shaped Windows
Most window manufacturers treat shaped glass as an afterthought. We treat it as a structural component. A hexagonal window over a front door or a radius-top transom above a picture window in a Sarasota home has to do two jobs at once: anchor the room’s design and survive a direct hit from wind-borne debris without failing.
Our Geometric & Shaped Windows are fabricated to order, never pulled from a stock catalog. You give us the rough opening, the shape, and the design pressure your wind zone requires, and we build the unit around those parameters. Triangular, hexagonal, octagonal, and curved configurations are all on the table, in aluminum or vinyl frames, with glass packages that meet Miami-Dade NOA and Florida Product Approval standards. The frames are reinforced at every joint so the shape itself doesn’t become a weak point under cyclic wind loading. That’s the difference between a decorative window and a hurricane window. If you’re replacing a shaped window in a 1980s home in Gulf Gate or South Gate, there’s a good chance the original unit was single-pane and untested. The opening can stay; the performance gets a full upgrade.
We stock this product across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which means we can match the right frame profile and glass package to your budget without compromising the wind-zone rating. In Sarasota, where the coast is minutes from almost every neighborhood, that rating is the point of the purchase.
Technical Specifications
- Frame materials: Aluminum or vinyl, with reinforced corner joinery built for shaped geometries.
- Glass packages: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass.
- Finish options: White, almond, bronze, black, and tan.
- Maximum size: No fixed cap. Each unit is custom fabricated to your exact opening and shape.
- Shapes available: Triangular, hexagonal, octagonal, arched, radius-top, and custom curved configurations.
- Design pressure: Matched to your wind zone, up to +/-100 PSF. We never overstate a rating.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Verify on your specific quote.
- Manufacturer lines: PGT, CGI, CWS, ES Windows, ECO, Mr-Glass.
Hurricane & Compliance Performance
Laminated Impact Glass
The core of every hurricane-rated window we sell in Sarasota is laminated impact glass. Two panes are bonded with a PVB (polyvinyl butyral) interlayer that holds the glass in the frame under impact. If debris strikes, the glass may crack, but the lamination keeps the barrier intact. That prevents wind and water from pressurizing the inside of your home, which is how most hurricane damage actually starts.
Miami-Dade NOA / Florida Product Approval
Each Geometric & Shaped Window configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number. These numbers are issued per configuration, not as a blanket certificate for every size and shape, so we verify the specific approval for your unit before it goes into production. You’ll see the documentation on your quote.
FBC / HVHZ Compliance
Every shaped window we fabricate for Sarasota is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest wind standard in the country, and it applies to our entire county. A window that passes generic coastal codes but not HVHZ won’t pass a Sarasota County permit inspection. We don’t install those.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact, which means a length of lumber fired at the glass at speed. TAS 202 tests cyclic wind-pressure loading, the repeated pressure shifts a hurricane puts on a window over hours. TAS 203 measures forced-entry resistance. A shaped window that passes all three earns its place in a Sarasota opening.
Design Pressure Matched to Your Wind Zone
We match the design pressure of each window to the wind zone of your specific address. Ratings go up to +/-100 PSF, and we never claim more than what the configuration actually delivers. If your home sits closer to the water, the requirement changes, and so does the engineering. We pull that from your zone map, not from memory.
Energy Performance Options
Low-E insulated glass and tinted glass are available on our shaped windows, so a decorative transom or octagon doesn’t become an energy liability. Low-E coatings reduce solar heat gain through the glass, which matters in Sarasota where the sun hits windows most of the year. Tinted options offer a similar effect with added privacy and glare control.
Color & Glass Options
We offer five frame finishes: white, almond, bronze, black, and tan. The right choice depends on your home’s architecture more than anything else.
White and almond are the workhorses for Sarasota’s Mediterranean and ranch-style homes in neighborhoods like Gulf Gate, South Gate, and Kensington Park. They read clean and traditional. Bronze and black frames have a stronger presence and suit contemporary builds and remodels in Bird Key, Lido Shores, and downtown condos, where darker window lines create contrast against stucco and glass. Tan splits the difference and works well on Florida coastal styles where you want the window to feel integrated rather than framed.
Glass selection follows the same logic. Clear laminated impact glass preserves the truest view, which matters when your shaped window frames a live oak or a slice of Sarasota Bay. Low-E insulated glass is the practical choice for south and west-facing openings where heat gain is real. Tinted glass adds privacy for shaped windows near a front entry or a side property line, and it still carries the same impact rating as clear.
Installation by TruePane Windows & Doors in Sarasota
A shaped window’s hurricane rating is only as good as the installation around it. A NOA-tested window set in a poorly sealed, out-of-square opening won’t perform the way the test documents say it will. That’s why every TruePane Windows & Doors installation in Sarasota follows the same sequence, whether it’s a single octagon in a guest bath or a full set of arched transoms along a hallway.
We start with a pre-install inspection of the rough opening. For shaped windows, this step matters more than any other: if the opening is out of square or the existing framing shows water damage, we fix that before the window goes in. Then we set the unit level, plumb, and square, anchoring it so the frame carries the load evenly. We apply an AAMA 812 low-expansion foam perimeter seal, which seals the gap while allowing for the thermal movement common in Florida’s climate. Our installation practice follows AAMA 2400/2410 standards, which govern how windows are installed in extreme conditions.
After setting, we run a final water test, clean the site, and walk you through the operation and maintenance of the window. We also handle the permitting side for Sarasota and Manatee County HVHZ jurisdictions. Shaped windows are structural windows in Florida, and the permit package has to match the NOA documentation exactly. We know what the building departments here ask for, and we include it in the quote.
Improper installation compromises the entire system. We’ve pulled out shaped windows in Sarasota that were set without a continuous seal, and the damage behind the frame was already underway. That’s the professional argument for why this product belongs in the hands of an installer who does this daily, in this market, under this code.
Frequently Asked Questions - Geometric & Shaped Windows
Design pressure is matched to the wind zone of your specific Sarasota address, up to +/-100 PSF. We never state a rating higher than what the tested configuration actually delivers. We pull your wind zone from the FBC map and engineer the unit around that number. Call (941) 214-2069 and we’ll confirm the design pressure for your opening in the quote.
Shaped windows are fabricated to order, so lead time runs longer than a stock rectangular unit. Typical production runs four to eight weeks depending on the shape, glass package, and manufacturer line. If you’re building on a schedule or replacing before hurricane season, we recommend measuring early. Call (941) 214-2069 and we’ll give you a current lead time for your specific configuration.
Yes. Sarasota County and the City of Sarasota both build under HVHZ rules, and any shaped impact window needs its Miami-Dade NOA or Florida Product Approval documentation submitted with the permit application. We prepare and submit that package as part of your project. The approval number is specific to each configuration, so it comes with your quote.
Yes, and that’s the entire point of this product. Triangular, hexagonal, octagonal, arched, and curved configurations are all fabricated to your exact opening. You provide the dimensions and shape, we engineer the frame and glass around them. If you have an unusual opening or a design idea, bring it to us and we’ll tell you what’s possible within HVHZ code. Call (941) 214-2069 to talk through your opening.
Rinse the frame and glass with mild soap and water a few times a year, and keep the weep holes clear of debris. Salt air in Sarasota neighborhoods near the water accelerates surface wear, so more frequent rinsing helps if you’re close to the Gulf. Inspect the sealant line annually during the dry season and call us if you see cracking or separation. Call (941) 214-2069 and we’ll take a look.
Get a Quote - Geometric & Shaped Windows in Sarasota
If you’re planning a shaped window in Sarasota, the best first step is an on-site measurement. We’ll confirm the opening, pull the wind-zone design pressure, and quote the exact configuration with the NOA documentation to match. Call (941) 214-2069 to schedule your free estimate.
Written by the team at TruePane Windows & Doors, serving Sarasota and the surrounding Florida wind zones since day one.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
