Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Sarasota: What to Know First
Independent Therma-Tru roof replacement and installation in Sarasota typically runs between $1,800 and $6,400 depending on the door’s construction, the condition of the rough opening, and whether the existing frame has rotted from Gulf Coast humidity. Most Therma-Tru jobs in our shop take one to two days once the door is on hand, and we quote a fixed price in writing before the first piece of trim comes off. This page is for Sarasota homeowners who have a Therma-Tru entry door, French door, or patio door that’s failed at the roof line or the header above it, and who want a straight answer about what it will take to make it right. Call (941) 214-2069 and a live person will answer.
How Therma-Tru Products Fail - and How We Fix Them
- Fiber-Classic and Classic-Craft header rot at the roofline. We see this constantly in older Sarasota neighborhoods like Southgate and Gulf Gate, where Therma-Tru’s compression-molded skins hold up fine but the pine jamb and brickmold above the door wick water from roof runoff. The door looks fine from the street; the top corner is quietly turning to sponge. We pull the unit, cut out the rot, rebuild the rough opening with pressure-treated stock, and reset the door so the reveal is even all the way around.
- Smooth-Star skin delamination from direct sun on west-facing entries. Therma-Tru’s Smooth-Star line uses a different skin chemistry than Classic-Craft, and on Sarasota homes where the front door faces the afternoon sun, those outer layers can separate at the top edge near the roof overhang. Nobody notices until the finish starts peeling in sheets. We strip the bad skin, re-bond, and repaint to factory spec, or replace the slab if the separation has reached the lock rail.
- Benchmark patio doors that bind at the top track. The Benchmark line is Therma-Tru’s patio door series, and the top track sags when the header above it deflects. Older Sarasota homes with flat or low-slope roofs put real weight on that opening. The door starts shaving the top rail, then the rollers chew through. We re-shim the header, replace the worn roller assemblies, and re-hang the panel so it glides without dragging.
- Door bottom and threshold failure from wind-driven rain. Therma-Tru’s adjustable sills work until standing water on a covered entry sits against them day after day. In Sarasota during summer, that’s most afternoons. The aluminum threshold pits, the sweep fails, and water walks under the door into the house. We install the current Therma-Tru sill design with proper slope and positive drainage, and we replace the sweep with the correct profile for the specific model, not a universal strip from a big-box aisle.
- Improper flashing at the roof-to-door transition. This isn’t a Therma-Tru defect; it’s a shortcut that shows up on too many Sarasota replacements done by crews that don’t understand coastal wind loads. The door gets flashed like it’s going on a house in Ohio, and the first hurricane season finds the leak. We install flashing that laps in the right order for our climate, with the roof plane shedding water past the door, never behind the jamb.
Our Therma-Tru Roof Replacement & Installation Process
- 1
Call and schedule. You call (941) 214-2069. A live person answers, takes down what you’re seeing, and sets a time that holds. No call-back roulette.
- 2
On-site inspection. We measure the door, the rough opening, the header, and the roof transition above it. We look for the failure’s real cause, not just its symptom. That means pulling trim when needed and checking for rot, deflection, and water staining before we touch anything.
- 3
Written quote, side by side. We price the fix with OEM Therma-Tru parts where it matters (skins, sills, weather stripping profiles), and we’ll show you a quality aftermarket option if one genuinely performs as well and saves real money. You decide with both numbers on paper in front of you.
- 4
The work. We do the removal, the structural correction if the opening has moved or rotted, the install or replacement, and the flashing. Every opening gets measured twice. The panel gets re-shimmed and sealed before the trim goes back on.
- 5
Warranty registration and testing. We register both manufacturer warranty layers in writing before the truck leaves your driveway. We operate the door several times, check the reveals, check the seal, and make sure water won’t find a way in.
- 6
Done Right follow-through. The 90-Day Done Right Promise means if anything about our workmanship isn’t right, we come back and make it right without paperwork or argument.
What Therma-Tru Roof Replacement & Installation Costs in Sarasota
| Scenario | Typical Range in Sarasota |
|---|---|
| Replace a single Therma-Tru entry slab, keep existing frame | $1,800 - $3,200 |
| Full entry door replacement (Classic-Craft or Smooth-Star) with new frame | $2,800 - $5,500 |
| Benchmark patio door replacement including header correction | $3,500 - $6,400 |
| Rot repair at the roofline above an existing Therma-Tru door | $600 - $1,800 (added to the door cost) |
What moves the price: whether the rough opening is sound, whether the job is slab-only or full frame, which line you’re replacing, and what we find when the trim comes off. Sarasota homes built in the 1960s and 70s often have header issues that newer construction doesn’t, and we’ll show you exactly what we found before we ask you to spend another dollar. Call (941) 214-2069 for a free estimate on your specific door.
Why Sarasota Homeowners Call TruePane Windows & Doors for Therma-Tru Work
Our shop has been doing glass, door, and opening work on the Gulf Coast long enough to know what salt air and storm season do to a door that wasn’t set right. Dale Kessler started TruePane in 2008 after a career spent watching warranty claims get denied because the install, not the product, caused the failure. That’s why we register both warranty layers in writing before we leave, state the durations plainly, and stand behind the workmanship for 90 days under the Done Right Promise. If the pane is not true, the job is not done. We’re an independent Therma-Tru service provider, not a factory arm, which means we’re free to tell you when an aftermarket part does the job without the markup. And because we also install PGT, CGI, CWS, and ES Windows, we’ll give you an honest read on whether your Therma-Tru is worth saving or whether a replacement from another line would serve you better for the money.
FAQs
Yes, in most cases. If the slab is sound and the frame hasn’t rotted, we can replace seals, sweeps, hinges, sills, and even re-skin a delaminating Smooth-Star. The decision comes down to what we find inside the rough opening, and we’ll show you the numbers both ways. Call (941) 214-2069 to have us take a look.
No. We’re an independent Therma-Tru service provider, and we use OEM parts where the warranty matters and register both warranty layers in writing after the job. We never install anything that quietly cancels your coverage. If a repair falls under the manufacturer’s warranty, we’ll help you file it and do the labor to spec.
Most single-door replacements take one day once the door is on hand. Jobs with significant rot repair at the roofline or full patio door replacements with header work run two days. We’ll give you a firm timeline in the written quote, and we show up when we say.
That depends on the door’s age, whether the frame has moved, and whether the failure is cosmetic or structural. Therma-Tru Classic-Craft doors from the last decade are worth saving in most cases. Older Smooth-Star units with skin separation or sills that have pitted through are often better replaced. We’ll quote both paths side by side and let you decide with real numbers in front of you. Call (941) 214-2069 for an honest assessment and a free estimate.
When the scope requires a permit, we pull it. Exterior door replacements that open into the same rough opening don’t always require one in Sarasota County, but any structural repair at the header does, and we handle that paperwork as part of the job. You’ll never be left holding a code violation because we skipped the process. If you’re not sure, call (941) 214-2069 and we’ll tell you straight.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.