Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Roof Replacement & Installation in Sarasota: What to Know First
We provide independent ES Windows roof replacement and installation across Sarasota, and most single-opening jobs are finished in one visit with the frame sealed and both warranty layers registered before we pull out of the driveway. Pricing runs honest and upfront: you’ll see the line items on paper before any work starts, and nothing gets added to the bill after the fact. If you own ES Windows and the roof, frame, or glass has failed, call (941) 214-2069 and a live person will answer.
This page is written for Sarasota homeowners who have ES Windows products already installed and need straight answers about replacement, installation, and what it should cost. No call center, no callback form. Just the shop.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds an aluminum frame product that shows up in a lot of mid-rise condos and higher-end single-family homes along the Sarasota waterfront. Aluminum is strong, but it conducts heat and collects salt. After ten or fifteen years of Gulf air, we see the same failure patterns repeat. Here’s what we find and what we do about it:
- ES Premium Series frame corrosion at the sill corners. Salt air works its way into the weep holes and sits against the raw aluminum edge where the corner keys join. The powder coat blisters, then the corner starts to lift. We remove the failed corner, treat the oxidation, replace the corner key, and reseal with a marine-grade sealant rated for coastal exposure. A factory replacement sash would not address the corner corrosion, so we fix the frame itself.
- ES Impact Series glass delamination around the edges. Impact-rated laminated glass has an interlayer that can begin to separate at the edges after years of thermal cycling in Sarasota heat. You’ll see a milky halo forming along the glass perimeter. This is a glass unit replacement, not a frame repair. We order the replacement IGU sized to the exact opening, set it with setting blocks, and register the glass warranty before we leave.
- ES Series 6000 roller wear on horizontal sliders. The original rollers on some ES 6000 sliders are nylon and wear flat against the track, especially on wide lanais where the panels are heavy. When the roller binds, the panel drags and the frame flexes. We swap in stainless steel rollers with sealed bearings and adjust the panel height so the lock lines up square. It’s the difference between a door that fights you and one that closes with two fingers.
- Weep system blockage causing interior water intrusion. Sarasota’s afternoon downpours push water against the frame, and if the weep holes are clogged with dirt or paint, the water backs up and finds its way inside. We clear the weeps, check the drainage slope, and replace any damaged weatherstripping. If the frame has a design flaw in the drainage path, we drill supplementary weeps and dress them with inserts so they don’t clog again.
- Improper original installation with no subsill pan. We see ES Windows in some older Sarasota builds set directly on the masonry opening with nothing but caulk underneath. When the caulk fails, the water goes straight into the wall cavity. On a replacement, we pull the window, inspect the rough opening, install a proper subsill pan, set the window with shims, and flash the perimeter before trim goes back on. If the opening isn’t right, no window is right.
Our ES Windows Roof Replacement & Installation Process
Every ES Windows job follows the same sequence. No shortcuts, no skipped steps. Here’s how it goes from the first call to the final walkthrough:
- 1
Call and schedule. You call (941) 214-2069, a live person answers, and we set a time window. We show up when we say we’ll show up, in uniform, with a background-checked technician who knows aluminum frame construction.
- 2
Measure and assess on site. We measure the rough opening twice, check the framing for rot or deflection, and look at how the existing window was flashed. Dale Kessler reads a rough opening the way other people read a room. If something’s off, we find it before the first piece of glass comes off the truck.
- 3
Parts decision and written quote. OEM ES Windows parts where they matter for fit and warranty. Quality aftermarket options where they’re functionally equal and less expensive. You see the line items side by side on paper, and the price we quote is the price you pay. If it’s not square and it’s not sealed, the rest of the conversation is going to be expensive, so we don’t cut corners on the parts that hold the frame together.
- 4
Removal and prep. We pull the old window or door without wrecking the opening, inspect the subsill and surrounding framing, and fix anything that needs fixing before the new unit goes in. On coastal Sarasota homes, this is where we address any existing water damage so the new install starts from a solid surface.
- 5
Install, seal, and test. The new unit is set plumb and square, shimmed properly, and anchored per the manufacturer spec. We flash the perimeter, seal the exterior, and run the panel back and forth until it operates smoothly. For impact units, we verify the glass and interlayer are clean and free of defects.
- 6
Warranty registration and cleanup. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. We walk you through what’s covered and for how long. Cleanup is done, the old unit is hauled off, and your 90-Day Done Right Promise starts the day the job is finished.
What ES Windows Roof Replacement & Installation Costs in Sarasota
Here are the ranges we quote most often for ES Windows work in Sarasota. Every job gets a written, line-item estimate before we start, so you know exactly where the money goes:
- Single ES window glass replacement (standard IGU): $275 to $600 installed, depending on glass size and coatings.
- Full ES window frame replacement (standard size): $850 to $1,800 installed, including subsill pan, flashing, and interior trim.
- ES sliding glass door panel replacement: $1,200 to $2,800 installed, depending on width, impact rating, and roller hardware condition.
- Full ES sliding door replacement with new frame: $2,800 to $5,500 installed, including demolition, disposal, and warranty registration.
- ES Impact window replacement (laminated glass, code-compliant): $1,100 to $2,400 installed, depending on size and exposure category.
- Frame repair, corner replacement, or weep system repair: $180 to $450 per opening, parts and labor included.
What moves the number: the size of the opening, whether the glass is impact-rated, the condition of the surrounding frame, and accessibility. Second-story work costs more because it takes more time and more care. We offer a permanent 5% discount for seniors and veterans, and if you’re pricing a repair over $250, mention the $50-off offer when you call. Call (941) 214-2069 for a free, written estimate on your exact opening.
Why Sarasota Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been doing this for over 42 years, the last two decades of that along the Gulf Coast. Dale Kessler founded TruePane in 2008 and runs it by a rule that’s still on the whiteboard: if the pane is not true, the job is not done. We’re an independent ES Windows service provider, which means we tell you the truth about your frame and your glass without a manufacturer’s talking points in the way. The 90-Day Done Right Promise goes on every job in writing. Both warranty layers, registered before we leave. A live person answers the phone 24 hours a day, seven days a week. And when you need work on other brands, we’re also set up for PGT, CGI, CWS, and ECO Window Systems, so the same crew handles the whole house. A square deal, done right, and we stand behind it.
FAQs
Yes, in most cases we can match the existing ES Windows frame finish and profile, either with OEM replacement parts or a custom powder coat matched to the original color. Sarasota sun fades aluminum over time, so we always match against a clean section of the frame rather than a sun-bleached edge, and we can tell you honestly if a perfect match isn’t possible before you spend anything. Call (941) 214-2069 and we’ll take a look at your unit.
No, in most cases only the glass unit needs replacement if the frame is still structurally sound and the seals are intact. We’ll inspect the frame, corner keys, and weep system during the estimate, and we’ll only recommend a full replacement if the aluminum is corroded, bowed, or no longer holding a square opening. Call us for a free estimate and we’ll tell you exactly what your window needs.
Most single ES Windows replacements are completed in one visit, typically within a day, including removal, installation, sealing, and cleanup. Multiple openings or full sliding door replacements may take longer depending on framing conditions and whether we need to address water damage behind the original install. We’ll give you a clear timeline on the written estimate.
The manufacturer warranty on the replacement parts and glass units we install is registered in writing before we leave the driveway, and our 90-Day Done Right Promise covers the workmanship on top of that. If you have an existing ES Windows warranty, we’ll check what’s still active and make sure our work doesn’t void it. We register both layers, and we don’t argue about what’s covered.
For impact-rated window and door replacements on the exterior of a Sarasota home, a permit is generally required and we handle the permit application as part of the job. For non-impact glass-only replacements within an existing frame, a permit is typically not required, but we’ll confirm all local building code requirements for your specific project during the estimate. We pull permits, pass inspections, and stand behind the work.
Most ES Windows roof replacements in the Sarasota area run from $275 for a standard glass unit up to $5,500 for a full sliding door with a new frame, depending on size, impact rating, and frame condition. The only way to get an exact number is to measure the opening and inspect the existing install, so call (941) 214-2069 to schedule your free estimate with a technician who knows ES Windows frames.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.