Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Sarasota: What to Know First
We provide independent ES Windows custom and geometric window service in Sarasota — repairs, glass replacement, hardware work, and full custom replacements — with most jobs completed in a single visit and honest pricing quoted before the truck rolls. Typical turnaround for common ES Windows repairs runs one to two weeks from signed quote to installed glass, depending on whether the lite is a stock shape or a cut-to-order geometric piece. If you own ES Windows and something is fogging, binding, or leaking, call (941) 214-2069 for a free estimate. This page is for Sarasota homeowners who want to know what their ES Windows problem actually is, what it should cost, and who can fix it without voiding the warranty.
How ES Windows Products Fail — and How We Fix Them
ES Windows builds a good product, but every window line has its weak points. Here is what we see on custom and geometric ES Windows units in Sarasota, and what we do about it.
- Radius-unit seal fogging on ES Elegance and ES Premium lines. Arched and curved insulated glass units fail along the bend first. The stress of the curve, combined with Sarasota humidity and salt air, shortens the edge seal. We replace the IGU with a new unit cut to the original radius and spec, not a patched reseal. A patched curved unit fogs again inside two years.
- Binding sashes on ES Tilt-Turn geometric windows. When a shaped window is even slightly out of square in the rough opening, the tilt-turn hardware binds. The original installer often forces it until the hinge pin wears. We pull the sash, true the frame, replace worn hinge cartridges, and reset the reveal so the window operates without drag.
- Roller and track wear on ES sliding units in coastal zones. Sarasota’s salt air corrodes the stainless rollers on ES sliding windows faster than inland. Homeowners notice a gritty, hard pull. We clean the track, replace rollers with marine-grade stainless, and realign the carriage so the door or window does not sag.
- Butt-joint seal separation on geometric multi-panel configurations. When two shaped ES Windows meet at an angle, the joint seal takes direct sun and storm exposure. We see cracked, chalked, or pulled sealant on five-to-seven-year-old installs along Siesta Key. We cut out the failed bead, back the joint with proper foam backer rod, and apply a marine-grade sealant matched to the frame color.
- Condensation between panes on ES laminated units after impact events. A storm can crack the seal on an ES impact window without breaking the glass. You see fog you cannot wipe away. The fix is IGU replacement, not a drill-and-fill. We have seen too many Florida homes where drill-and-fill left the window fog-free for a season, then clouded again the next summer.
Our ES Windows Custom & Geometric Windows Process
Every ES Windows job follows the same discipline, whether it is a single fogged arch or a full wall of geometric impact glass.
- 1
You call, a person answers. Not a voicemail tree. We note the window type, the symptom, and the nearest cross street in Sarasota. We set an appointment time and keep it.
- 2
We measure twice, on site. For a radius or geometric window, we template the opening and confirm the original manufacturer’s dimensions. ES Windows arched units are not all the same radius across lines, and guessing is expensive.
- 3
We quote on paper, side by side. OEM glass, quality aftermarket glass, and the hardware options are written out line by line. You see the difference in cost and coverage before you commit.
- 4
We do the work in one visit when possible. The replacement unit is ordered to spec, cut precisely, and installed. The opening gets cleaned, the sealant is tooled properly, and the window is set true.
- 5
We test the operation and the seal before leaving. The sash cycles without drag, the gaskets seat, and the glass is clear. If the pane is not true, the job is not done.
- 6
We register both warranty layers in writing, in front of you. Durations stated, coverage clear, no fine print that covers neither.
What ES Windows Custom & Geometric Windows Costs in Sarasota
Pricing depends on whether the unit is a flat rectangle, an arched radius, or a fully custom geometry, plus whether you need impact-rated glass. Here are honest ranges for the Sarasota market.
- Fogged IGU replacement, flat rectangular ES unit: $280–$520 per lite, installed.
- Arched or radius ES window IGU replacement: $540–$980 per unit, depending on radius and glass spec.
- Full custom geometric ES window replacement, non-impact: $1,200–$2,600 installed per opening.
- Custom geometric ES impact window replacement: $2,400–$4,800 installed per opening, depending on size and required design pressure rating.
- Hardware repair or replacement on ES Tilt-Turn or sliding units: $180–$420, parts included.
What moves the price is the radius, the glass type, and whether the frame needs to be pulled and reset. We do not pad the quote, and we do not change the number once the job starts. Call (941) 214-2069 for an exact quote — estimates are free.
Why Sarasota Homeowners Call TruePane Windows & Doors for ES Windows Work
We have served Sarasota and the surrounding Gulf Coast for over 42 years through a craft heritage that started with Dale Kessler’s father in a small Columbus glass shop. Every ES Windows job is covered by our 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. We are an independent ES Windows service provider — not a factory rep, not an authorized dealer — which means we work for you, not for the manufacturer. When an ES Windows repair does not make sense, we quote it straight, and if a replacement is the smarter call, we can also show you comparable PGT, CGI, CWS, and ECO Window Systems lines side by side on paper. A live person answers the phone 24 hours a day. Call (941) 214-2069 and you will get a person, not a menu.
FAQs
Yes, in most cases. Independent service does not automatically void an ES Windows warranty, and (941) 214-2069 is the number to call if you want us to confirm your specific coverage before work begins. The warranty-safe practices we follow on ES Windows custom and geometric units include using OEM glass specs for curved IGUs and documenting all work in writing. As Dale Kessler puts it: if it’s not square and it’s not sealed, the rest of the conversation is going to be expensive. Call for a free consult.
Most flat rectangular IGUs are installed within one week of the signed quote. Radius and fully custom geometric pieces take one to three weeks because the glass is cut to order, not pulled from a shelf. Call (941) 214-2069 and we will give you a firm timeline in writing before you commit.
We quote both, side by side on paper. OEM ES Windows glass and hardware is the safest bet for warranty continuity, but in some cases a marine-grade aftermarket roller or gasket outlasts the original. You choose, and we register whichever warranty applies in writing. Call (941) 214-2069 for a quote that shows the difference in plain English.
Repair is the smarter call when the frame is sound, the opening is square, and only the glass or hardware has failed. Replacement makes sense when the frame has rotted, the opening has shifted, or the original install was out of true. We will tell you which one applies to your window, and we will not sell a replacement when a repair is the right fix. Call (941) 214-2069 for an honest assessment.
We register both warranty layers in writing, test every unit, and stand behind the work with the 90-Day Done Right Promise — if it is not done right, we make it right. No paperwork fights, no arguing. Call (941) 214-2069 and we will show you exactly how it works.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.