Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Custom & Geometric Windows in Sarasota: What to Know First
We’re an independent CGI service provider in Sarasota handling custom and geometric window repair, glass replacement, and full-unit installation for CGI owners across the area. Most single-unit CGI jobs in Sarasota run $400 to $1,400, and we typically complete the work in one visit once the correct glass or frame component is in hand. We are not affiliated with or authorized by CGI, which means we answer to you, not to a corporate warranty desk.
This page is for homeowners with CGI custom & geometric windows, arched or curved units, oversized openings, or impact-rated shaped glass who want the job done right the first time. If that’s you, call (941) 214-2069 and a live person will answer.
Key Takeaways
- We repair and replace CGI custom & geometric windows in Sarasota, including arched, radius, trapezoid, and oversized units.
- Most jobs cost between $400 and $1,400 per unit; custom geometry adds to the price because the glass is cut to match, not pulled off a shelf.
- CGI warranty work is handled carefully, we register what needs registering and use OEM parts where the warranty requires it.
- We’re independent of CGI, which means straight answers about repair versus replace, not a sales script.
- Every job carries The Keystone Standard and the 90-Day Done Right Promise, in writing.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact window, but Sarasota’s salt air, humidity, and afternoon thunderstorms find the weak points in any window over time. Here’s what we actually see on custom and geometric CGI units in Sarasota homes.
- Radius and arch units lose seal at the apex. On CGI’s shaped units, the insulated glass seal often fails first at the tightest curve near the top of the arch. Condensation between the panes starts there, then creeps downward. We replace the sealed unit with glass cut to the original radius and match it to the surrounding lites. A flat replacement glass in a curved opening is not an option, and we won’t pretend it is.
- Geometric frame corners open up on stucco homes. CGI custom trapezoid and triangle frames, especially on older Sarasota stucco exteriors, can pull away at the corners as the building settles and the stucco shifts. You’ll see hairline cracks above the frame or feel a draft at the corner. We reset the frame, re-flash it, and seal the joint properly, no caulk-bandage fix that fails next storm season.
- Roller and track wear on CGI sliding glass doors with custom transoms. When a CGI sliding door carries a heavy custom transom above it, the door track takes more load than stock setups. We see roller wear early, and the door starts dragging. We replace the rollers with quality parts, re-shim the transom load, and get the door sliding true again.
- Custom-size CGI impact glass delaminates at the laminate edge. On some CGI impact units, particularly older ones with custom dimensions, the PVB laminate between the glass panes starts to haze or separate at the outer edge. It’s a slow failure, but once moisture gets into the laminate, the glass loses some of its structural integrity. We order replacement glass to spec and install it with the frame re-bedded.
- Oversized fixed windows bow under their own weight. CGI oversized fixed units, especially those six feet wide or more, can develop a slight bow over time. The glass doesn’t shatter, but it stresses the seal and can cause the frame to sag a fraction. We re-glaze, re-shim, and if needed add structural reinforcement in the frame channel so it stays put.
Our CGI Custom & Geometric Windows Process
Every CGI job we take in Sarasota follows the same steady path. No shortcuts, no skipped steps.
- 1
Call and describe the window. A live person answers 24/7. We’ll ask what you’re seeing, which window it is, and whether it’s a custom shape or standard rectangle. That tells us whether we’re dealing with a stock part or a cut-to-order situation.
- 2
On-site measurement and diagnosis. A background-checked technician arrives in uniform, measures every opening twice, and reads the rough opening the way Dale Kessler reads a room, catching what’s off before the first piece of glass is unloaded.
- 3
Parts decision on paper. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. If your CGI warranty is still active and the window qualifies, we use OEM parts. If not, we discuss quality aftermarket equivalents that will hold up in Sarasota conditions, and we note the difference plainly.
- 4
The repair or replacement. We cut or order glass to the original geometry, set the frame true, and seal it properly. If the pane is not true, the job is not done.
- 5
Testing and walk-through. We cycle the window or door, check seals, and show you exactly what we did. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway.
- 6
Ninety days to be sure. If anything is off within 90 days, we make it right. No arguing, no fine print.
What CGI Custom & Geometric Windows Costs in Sarasota
Here’s the straight answer on pricing in Sarasota. These are typical ranges for the CGI jobs we handle; your exact quote depends on size, geometry, glass type, and whether the frame is reusable.
- Sealed unit replacement for a standard CGI impact window: $350-$700 installed
- Arched or radius CGI glass replacement: $500-$1,100 installed, depending on radius and glass package
- Full custom geometry unit (trapezoid, triangle, large arch) replacement: $900-$1,800 installed
- CGI sliding glass door roller and track repair with custom transom: $300-$650
- Frame reset and re-flash on a custom CGI window: $450-$950
The two biggest price movers are glass type, impact-rated laminated glass costs more than annealed, and geometry. A rectangle comes off a production line. A true arch gets cut and fitted to your opening, and there’s no shortcut around that. If you’re weighing repair versus replace, call (941) 214-2069 for a free estimate, and we’ll give you numbers on both paths so you can decide with the facts in front of you.
Why Sarasota Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Sarasota and the surrounding Gulf Coast communities for over 42 years through a heritage of craft that started with Dale Kessler’s father in a small Columbus, Ohio glass shop. Dale grew up cutting lites and setting frames before he was old enough to drive, and that early training still governs how we work: measure twice, seal once, and stand behind it.
Every CGI job we take is backed by The Keystone Standard. Both manufacturer warranty layers are registered in writing and durations stated before the truck leaves the driveway. If something isn’t right within 90 days, the Done Right Promise means we fix it. No paperwork fight, no arguing, no fine print that covers neither.
We also understand that a CGI window isn’t the only thing hanging on a Sarasota house. When we’re on a job and we see a PGT, CWS, ES Windows, or ECO Window Systems unit that needs attention, we can handle it. An authorized installer for more than a dozen manufacturer lines means we’re not going to tell you to call someone else while we’re standing in your living room. A live person answers the phone 24/7, and the technician who walks your house is background-checked, uniformed, and working the same way he’d work on his own mother’s windows.
And if the window isn’t square and it isn’t sealed, the rest of the conversation is going to be expensive. We’d rather get that right the first time.
FAQs
It depends on what your CGI warranty says and what the job involves. We’re an independent CGI service provider, not an authorized CGI dealer, and we never imply otherwise. If your window is under warranty and a manufacturer defect caused the failure, CGI’s warranty may still apply regardless of who touches it. If the failure is from installation, weather, or age, you’re paying out of pocket, and we’ll tell you that before we start. Call (941) 214-2069 and we’ll walk through what your specific situation looks like.
For a standard rectangle CGI unit, we can often complete the job in a week or less from the day you call. Custom geometry changes that. A true arch or trapezoid glass gets cut to match your existing frame, which usually means a two-to-four-week window. We’ll give you a straight timeline when we quote. Call (941) 214-2069 and we’ll tell you how long it will actually take.
It depends on two things: the condition of the frame and the age of the glass package. If the frame is sound and the opening is square, a sealed unit replacement often makes more sense than a full-unit replacement for a custom CGI window because the cost is half or less. If the frame has shifted, the stucco has pulled away, or the glass has delaminated, replacement is the honest call. We’ll quote both options side by side on paper and let you decide. Call (941) 214-2069 for a free estimate.
Yes. We order cut-to-spec glass that matches your existing geometry and frame that matches the line and color already on the house. The goal is a window that looks like it was there from day one, not a patch job. We’ll match the old unit as closely as the current CGI or quality aftermarket product line allows.
Yes. Our estimates are free, and we’ll give you a written, line-item quote before any work begins. No surprise line items on the bill. Call (941) 214-2069 to schedule yours.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.