Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Sarasota: What to Know First
Therma-Tru roof repair in Sarasota typically runs $285 to $680 for a service call that includes diagnosis, parts, and labor on most gable-end and dormer framing around Therma-Tru entryways. We’re an independent Therma-Tru service provider, not a dealer, and we don’t charge extra for honesty: you’ll get a written quote before we touch anything, and most repairs take one visit. If you own a Therma-Tru fiberglass or steel entry door in a Sarasota home and the roof flashing above it is leaking, the brickmold is swelling, or the header shows water stains, this page is for you. Call (941) 214-2069 and a live person answers.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru doors are built tight, but they don’t fail in isolation. In Sarasota, roof leaks attack the door from above, and the damage shows up below. Here are the failures we see and what we do about them.
- Flashing separation above the Classic-Craft and Fiber-Classic series. The galvanized flashing that should bridge roof shingle to door cap gets lifted by wind-driven rain or trimmed short by a previous installer. Water runs behind the brickmold and into the rough opening. We remove the cap, replace flashing with proper step flashing tied into the roofline, and reseal the top cap to the door frame.
- Sill pan rot on the Smooth-Star series. A lot of Sarasota homes have Smooth-Star fiberglass doors on west-facing entries where afternoon storms push rain under the overhang. If the sill pan wasn’t set on a watertight bed, the subfloor under the door rots before you see anything. We pull the door, inspect the pan, replace rot with pressure-treated stock, and set the pan with a continuous membrane.
- Header sag above the Benchmark line. The Benchmark steel door is heavy. In attic spaces with undersized headers (common in 1980s and 1990s Sarasota builds), the weight transfers to the door frame. You’ll notice cracking at the top corners of the jamb. We reinforce the header from inside the attic, right the frame, and return the door to plumb.
- Weep hole blockage on Therma-Tru patio door framed openings. The multi-point locking Therma-Tru door assemblies drain through weep holes at the base. In Sarasota humidity, those holes attract mold, gnats, and mineral buildup until they clog. The frame holds water, which wicks into adjoining framing. We clear and, when needed, enlarge the weep channels and check the slope of the rough opening before clipping everything back.
- Fiberglass skin delamination on sun-exposed sides. On southern exposures, constant UV and heat cycles can separate the fiberglass skin from the door core at the top stile where the roof overhang is narrow. We see it on the older Fiber-Classic doors in Gulf Gate and Southgate more than anywhere else. We re-laminate with structural adhesive, clamp it, and refinish to match. If the core is compromised, the customer gets a replacement quote the same day.
Our Therma-Tru Roof Repair Process
Every Therma-Tru job in Sarasota follows the same order of operations. We measure twice. We keep the house clean. We don’t leave you holding a half-fixed door.
- 1
Call and walkthrough. You describe the symptom. We ask about the roof line, the door’s age, and any previous repairs. A live person answers, day or night.
- 2
On-site inspection. A background-checked, uniformed technician checks the roof flashing, the door cap, the jamb, the sill, and the header. We measure the rough opening even if we’re only replacing flashing, because a misread rough opening explains most repeat failures.
- 3
Written diagnosis and quote. We put the problem and the fix on paper, side by side. OEM Therma-Tru parts where they preserve warranty and quality aftermarket parts where they don’t compromise the door. No surprises on the bill.
- 4
The repair. Flashing, header work, sill replacement, or re-lamination, done in a single visit for most jobs. We protect the surrounding roof and wall, and we clean up after ourselves.
- 5
Test and verify. We run a water test on the repaired area, check the door’s sweep and seal, and confirm the frame sits square.
- 6
Warranty registration and the 90-Day Done Right Promise. Before the truck leaves the driveway, we register every relevant warranty layer in writing and state the durations. If it’s not done right, we make it right. No arguing.
What Therma-Tru Roof Repair Costs in Sarasota
You’ll spend between $285 and $680 on most Therma-Tru roof repairs we handle in Sarasota. The table below gives you the honest ranges, not a teaser bid.
- Flashing repair and reseal: $285-$420
- Brickmold replacement with rot inspection: $340-$520
- Sill pan replacement and subfloor repair: $450-$680
- Header reinforcement and frame releveling: $520-$760
- Full door replacement with Therma-Tru unit: $1,600-$3,400, depending on size, glass package, and impact rating
What moves the price: access (second-story entries run higher), extent of hidden rot, whether you need OEM Therma-Tru components, and whether you’re within a Sarasota historic district that requires a specific look. Permits, when required, are handled by us and pulled before work starts. Call (941) 214-2069 for a written quote at no charge.
Why Sarasota Homeowners Call TruePane Windows & Doors for Therma-Tru Work
Dale Kessler founded TruePane Windows & Doors in 2008 after spending enough years watching out-of-true installs and voided warranties turn into homeowner bills. We grew up in the glass and door trade, and we’ve worked the Gulf Coast for the better part of two decades, including full replacements along the Siesta Key corridor where salt air and storm exposure make a sloppy install a real liability.
Every Therma-Tru repair we complete carries the 90-Day Done Right Promise backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. We stand behind it. We also service PGT, CGI, CWS, and ES Windows, which helps when a roof leak has damaged more than the door. A live person answers the phone 24 hours a day, 7 days a week. We’ll be there when we say.
FAQs
No, not when the repair is done correctly. Therma-Tru warranty coverage applies to manufacturing defects in the door itself, not the surrounding framing or roofing. We take care to use OEM Therma-Tru components where specified and never alter the door in a way that could void coverage. We register all warranty layers in writing before we leave. Call (941) 214-2069 if you’d like us to check your specific situation.
Most flashing and brickmold repairs are done in one visit, typically 2 to 4 hours on site. If we find hidden rot or need to reinforce a header, the job may extend to a second day. We’ll tell you before we start, not after.
Yes. We source OEM Therma-Tru brickmold, caps, sweeps, and weatherstripping through our supply network, and we keep common parts on the truck. When an aftermarket part is the better call for your budget and the door’s condition, we put both options on paper and let you decide. Call (941) 214-2069 to schedule a free estimate.
If the door skin is delaminated, the core is waterlogged, or the frame is out of square from header sag, replacement is usually the smarter long-term call in Sarasota’s climate. If the door itself is sound and the problem is flashing, brickmold, or a sill pan, repair returns it to service for hundreds, not thousands. We’ll show you the numbers side by side.
Yes, when the scope requires it. Header reinforcement and any work that touches structural framing falls under Sarasota County permitting. We pull the permit, schedule the inspection, and don’t call the job done until it passes. It’s a square deal, in writing, every time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.