CWS Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

CWS Shingle, Tile & Metal Roofing in Sarasota: What to Know First

We provide independent CWS shingle, tile and metal roofing service across Sarasota, with most repair calls diagnosed and completed in a single visit. Pricing runs honest and itemized: a typical CWS roof repair in Sarasota falls between $350 and $1,800 depending on what we find under the surface, and full replacements start around $14,000. If you own a CWS roof and it is leaking, lifting, or just not draining the way it should, call (941) 214-2069 and we will send a technician who has worked on this exact product line before.

Call (941) 214-2069

This page is written for CWS owners in Sarasota who want the work done right the first time, by a crew that understands how these roofs fail in this climate. We are not a CWS dealer and we are not affiliated with the manufacturer. We are an independent CWS service provider with more than 42 years of local trade history behind us, and we answer the phone when you call.

How CWS Products Fail, and How We Fix Them

CWS roofs are common in Sarasota neighborhoods from Palmer Ranch to Lakewood Ranch, and over the years we have learned exactly where they give out first. Here are the five failure modes we see most often on CWS shingle, tile and metal systems in this climate, along with what we do about each one.

• CWS shingle underlayment rot at the eaves. We regularly get called to CWS shingle roofs in Sarasota that look fine from the street but have rotted underlayment along the drip edge. It happens because afternoon thunderstorms dump water faster than the original flashing detail can shed it, and the moisture sits against the deck for years. We pull the affected courses, cut out the rotted felt, inspect the plywood deck, and install a self-adhered ice-and-water shield before relaying the shingles. The fix usually runs one day for a 20-foot eave section.
• CWS tile systems with cracked hip and ridge pieces. Tile roofs take a beating in Sarasota, and CWS hip and ridge tiles are no exception. We see hairline fractures that let water creep into the mortar bed, and by the time the homeowner notices a stain on the ceiling, the damage underneath is already done. We replace the cracked pieces, re-bed and re-point the ridge, and inspect the underlying flashing before covering anything back up. If the tile is still available from CWS, we use it. If it is discontinued, we have a local Sarasota supplier that stocks a dimensional match, and we will show you both options on paper before we proceed.
• CWS metal roof panel screws backing out. This is the one we see most on CWS metal roofs in Sarasota that are five to eight years old. The neoprene washers under the panel screws dry out in the Florida sun, the screws lose tension, and the panels start to lift just enough to let wind-driven rain underneath. We walk the entire roof, re-torque every screw that is still serviceable, and replace the ones with cracked washers. On a typical 1,800-square-foot roof, that is about 300 screws, and we check every one of them. Then we tell you honestly how many years are left in the panel coating.
• Wall-to-roof transition leaks at stucco intersections. CWS roofs often meet stucco walls at patio covers, entryways and second-story offsets, and the original counter-flashing is usually a thin piece of painted aluminum. Salt air and humidity in Sarasota eat through that flashing faster than most people expect, and the leak shows up inside the wall, not on the ceiling. We cut a clean reglet, install a new two-piece counter-flashing assembly, and seal it with a polyurethane that holds up to UV and salt spray. This repair often stops a leak that two other companies have already tried to caulk shut.
• Failed sealant at CWS skylight curbs and penetrations. Pipe boots, vent stacks and skylight curbs on CWS roofs are sealed with a factory-applied butyl that hardens and cracks over time. In Sarasota, where we get over 50 inches of rain a year, that means water finds its way in around the penetration long before the roof itself wears out. We strip the old sealant, clean the curb or boot down to bare metal, and re-seal with a commercial-grade urethane. If the boot itself is shot, we replace it and flash the new one properly, not just smear caulk over the top.

Our CWS Shingle, Tile & Metal Roofing Process

When you call us about a CWS roof in Sarasota, here is what happens, in order, every time.

1. 1
   You call, and a person answers. Not a voicemail tree, not a callback form. A live person at (941) 214-2069 takes your information and schedules a visit. You will know who is coming and when.
2. 2
   We walk the entire roof and we measure twice. Our technician inspects the damaged area, but he also walks the rest of the roof. CWS failures tend to show up in more than one spot, and we would rather find all of it now than have you call us back in six months.
3. 3
   We give you a written diagnosis and a line-item quote. You see exactly what we found, exactly what we recommend, and the dollar figure for each part of the work. If we can use the original CWS component, we do. If an aftermarket part makes more sense for availability or durability, we tell you that on paper, with the reason.
4. 4
   We do the repair, and we do not cut corners. Flashings get reused only if they are still sound. Old sealant gets stripped, not covered over. Every repair gets done as if we were working on our own roof, because the owner Dale Kessler reminds us of the founding rule every week: if it is not square and it is not sealed, the rest of the conversation is going to be expensive.
5. 5
   We test the repair before we leave. Water test on the repaired area, visual re-check of the surrounding courses, and a photo of the finished work. You see what we did and we stand behind it for 90 days under our Done Right Promise.
6. 6
   We clean up and leave the site the way we found it. No nails in your driveway, no scraps in your gutter, no torn shingles in your flower beds. Uniformed, background-checked techs, every job.

What CWS Shingle, Tile & Metal Roofing Costs in Sarasota

You deserve a straight answer on pricing, so here it is. These are the ranges we quote most often on CWS roofs in Sarasota.

• Leak repair at a wall-to-roof transition: $450 to $900, depending on the footage of flashing we replace.
• Re-bedding and re-pointing a CWS ridge or hip line: $600 to $1,400, depending on the linear feet and tile availability.
• Roof screw replacement and re-torque on a CWS metal roof: $350 to $750 for an average home.
• Skylight or vent boot re-seal or replacement: $300 to $650 per penetration.
• Partial shingle section replacement (underlayment and shingles): $900 to $2,200, depending on deck condition.
• Full CWS roof replacement: starts around $14,000 for shingle, $22,000 for tile, and $25,000 for standing-seam metal on an average Sarasota home.

What moves the price: the condition of the deck, whether your CWS tile or shingle color has been discontinued, how many penetrations need re-flashing, and whether the leak has gone into the wall. We do not pad the bill and we do not surprise you after the fact. The quote you approve is the price you pay. Call (941) 214-2069 for a free estimate on your CWS roof.

Why Sarasota Homeowners Call TruePane Windows & Doors for CWS Work

We have been serving Sarasota and the surrounding communities for over 42 years, and the roofing work we do carries the same Keystone Standard as every window and door we install. That means both warranty layers registered in writing, durations stated, and a 90-Day Done Right Promise on every CWS repair we make. If it is not done right, we come back and make it right. No paperwork fights, no arguing.

Our techs know CWS, and they also work daily on PGT, CGI, ES Windows and ECO Window Systems products, so when a roof leak has damaged a window or a door below it, we can handle the whole job in one visit. That saves you from coordinating two contractors. A live person answers our phone 24 hours a day, seven days a week, and when you call, you get the kind of steady, plainspoken service Dale Kessler has built this company on since 2008. He grew up in a glass shop in Columbus, Ohio, cutting lites before he could drive, and he still reads a roofline the way other people read a room. We hire local, we train our own, and we plan to be in Sarasota thirty years from now.

FAQs