Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Sarasota: What to Know First
CGI roof replacement and installation in Sarasota means working on a product line built for hurricane country, and TruePane Windows & Doors handles it as an independent CGI service provider. Most CGI roof jobs in Sarasota run two to five business days from the first call to a finished installation, depending on the roof profile and whether we’re matching existing glass or ordering new panels. We give you a written line-item quote before any work starts, and the price on that quote is the price you pay. If you own a CGI roof and something is leaking, fogged, or just not closing the way it used to, call (941) 214-2069 and we’ll send someone who knows the product.
This page is for Sarasota homeowners who have a CGI roof over a lanai, patio, entryway, or pool deck and need it replaced or installed correctly. If you’re weighing repair against replacement, or trying to figure out whether the problem is the glass, the frame, or the way the original install was done, you’re in the right place.
Key Takeaways
- We replace and install CGI roof systems in Sarasota as an independent service provider, not a manufacturer rep.
- Every job gets a written line-item quote before work begins. No change orders, no surprise line items.
- We register both manufacturer warranty layers in writing before our truck leaves your driveway.
- Our 90-Day Done Right Promise covers the workmanship. If it’s not right, we make it right.
- Call (941) 214-2069 for a free estimate. A live person answers.
How CGI Products Fail - and How We Fix Them
CGI builds a solid product. Most of what we see in Sarasota isn’t a manufacturing defect. It’s the result of time, salt air, and an original installation that wasn’t quite right. Here are the failure modes we run into most often on CGI roofs in this area.
- Capillary water intrusion at the panel seams on CGI Estate Collection roofs. The Estate Collection uses a low-profile frame with tight sightlines, which looks clean but leaves less room for sealant. After ten or twelve years of Sarasota humidity and afternoon thunderstorms, the butyl seal between the frame and glass can start to wick water. The fix is pulling the panel, cleaning the glazing pocket, and re-bedding with a marine-grade sealant rated for constant moisture. You’ll hear some companies say they can just caulk over the seam. We don’t do that. It fails again in six months.
- Frame corrosion on older CGI Sentinel Series roofs near the water. If your home is within a mile of the Gulf or the bay, airborne salt gets into the frame channels and sits there. CGI’s powder coating is good, but it’s not indestructible. We see pitting and flaking at the corners where panels meet the support structure, especially on roofs installed before 2010. When the frame is sound, we strip, prime, and recoat. When it’s compromised, we replace the affected panels rather than patching metal that won’t hold a seal anyway.
- Fogged or clouded glass panels on CGI roof installations where the original installer used the wrong spacer. Glass units fail when moisture gets between the panes, and on a roof installation that moisture has nowhere to go in the Florida heat. A fogged CGI panel almost always means the desiccant in the spacer is spent and the edge seal has opened up. We order replacement insulated glass units matched to the original panel dimensions, and we specify a spacer built for high-humidity coastal exposure. This is a warranty-sensitive repair, so we document everything for you and the manufacturer.
- Sagging or deflecting roof sections on CGI systems installed over spans that were too long for the panel spec. CGI publishes span limits for every series. When a builder or a previous contractor stretches those limits to save a few hundred dollars on structural framing, the roof flexes. You’ll notice water pooling in spots after a rain, or doors that suddenly don’t line up under the roof. We pull the panels, correct the support structure, and re-install to CGI’s published span table. The glass is almost always fine. It’s the framing underneath that was the problem, and that’s what we fix.
- Locking and latching failures on CGI Targa Series roof panels that open. The Targa line is popular on Sarasota pool decks and lanais for its operable roof panels. The latch mechanisms take a beating from salt air and hard use, and we replace more of them than any other single component on CGI roofs. We use OEM latches when they’re available and quality aftermarket units when they’re not, and we tell you which one you’re getting and why before we quote the job.
Our CGI Roof Replacement & Installation Process
Here’s how a CGI roof job runs with our crew, from the first phone call to the final walk-through.
- 1
The call. You reach a live person at (941) 214-2069. We ask what you’re seeing, which roof it is, and roughly when it was installed. Then we schedule a time that works for you, and we show up when we say we will.
- 2
The site inspection. Our technician measures every opening twice and goes over the roof with you. We’re looking at the panels, the frame, the drainage, and the condition of the sealant. You’ll know what we found and what it means before we quote anything.
- 3
The written quote. We put the scope of work on paper with line-item pricing. If the job needs OEM CGI parts, the quote says that. If a quality aftermarket part will do the same job for less, the quote says that too. You decide, not us, not some sales pressure play.
- 4
The work. Our team removes the old panels, corrects any structural issues, and installs the new CGI roof per the manufacturer’s published specifications. The roof gets sealed, flashed, and dressed so it sheds water the way it should in a Sarasota downpour.
- 5
The test and the paperwork. We water-test the installation, check every panel for square and seal, and walk you through the finished job. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway. If something is off, it’s not done. That’s the rule.
- 6
The follow-through. The 90-Day Done Right Promise covers our workmanship. If anything isn’t right in that window, we come back and fix it. No paperwork fights, no arguing.
What CGI Roof Replacement & Installation Costs in Sarasota
CGI roof work in Sarasota isn’t the lowest-priced thing you’ll buy for your home, and that’s the honest answer. The panels are built for impact resistance and coastal code compliance, and the labor has to match the product. What most people want to know is where the price lands, so here’s a straight look.
| CGI Roof Scenario | Typical Range in Sarasota |
|---|---|
| Single panel glass replacement (insulated unit, standard size) | $400-$900 |
| Panel re-seal and gasket replacement (per panel) | $150-$350 |
| Full roof section replacement (100-200 sq ft) | $4,500-$9,800 |
| Structural correction and re-installation (sagging roof) | $2,000-$6,000 depending on framing scope |
| Complete lanai or patio roof replacement | $12,000-$28,000+ |
What moves the price is the size of the roof, the CGI series you have, whether the structure underneath needs work, and whether we’re matching existing glass or ordering custom units. We give you a fixed written quote before any work starts. No surprise line items, no “while we’re here we noticed” change orders. Call (941) 214-2069 to schedule a free estimate and we’ll put the real numbers on paper for your roof.
Why Sarasota Homeowners Call TruePane Windows & Doors for CGI Work
We’ve served Sarasota and the surrounding communities for over 42 years, and Dale Kessler founded this company in 2008 on a rule he keeps on the whiteboard to this day: if the pane is not true, the job is not done. That applies to every CGI roof we touch. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. We’re an authorized installer for more than a dozen manufacturer lines, and when a CGI roof can’t be saved, we’ll quote you side by side on comparable lines like PGT, CWS, ES Windows, and ECO Window Systems so you can see exactly what you’re buying. A live person answers our phone 24 hours a day, seven days a week, so when your CGI roof starts acting up at 8 p.m. on a Tuesday, you don’t get a voicemail tree. You get us.
FAQs
No, not if the work is done correctly and the replacement parts meet or exceed the original specification. What voids a CGI warranty is improper installation, unapproved modifications to the frame or structure, and using non-matching components without documentation. That’s one reason we register both warranty layers in writing before we leave the job. If you’re unsure whether a specific repair affects your coverage, call (941) 214-2069 and we’ll walk through it with you. The estimate is free.
Most CGI roof replacements in Sarasota take two to five business days from the first call to a finished installation. Panel replacements and re-seals can often be done in a single visit. Full roof replacements depend on the size of the roof and whether the structural framing underneath needs correction. We’ll give you a realistic timeline when we quote the job, and we’ll be there when we say.
In most cases we can match existing CGI panels, either with OEM units or with aftermarket insulated glass that meets the original spec. The deciding factors are the age of the roof, the condition of the frames, and whether the original installation used standard or custom panel sizes. If a partial replacement makes sense, we’ll quote it. If the roof is far enough gone that patching it would be throwing good money after bad, we’ll tell you that straight, and we’ll show you the numbers for both options. Call (941) 214-2069 and we’ll take a look.
On CGI roofs in Sarasota, we most often find the leak isn’t in the glass at all. It’s at the seam where the panel frame meets the support structure, or in the flashing at the roof-to-wall transition. The original sealant breaks down after enough years of salt air and thermal cycling, and water finds the path. We locate the actual source of the leak before quoting a repair, because caulking over a seam without finding where the water gets in is a temporary patch on a permanent problem. Call (941) 214-2069 for a site inspection and a fixed quote.
OEM CGI parts are made to the exact factory specification and carry the manufacturer’s documentation, which makes them the safest choice for warranty-sensitive repairs. Aftermarket parts, when they’re high quality, can cost less and perform just as well for certain components like insulated glass units and gaskets. We quote both options on paper so you can see the price difference and make the call yourself. The one thing we won’t do is install a part we wouldn’t put on our own roof. Call (941) 214-2069 to talk through what your specific roof needs.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.