Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Repair in Sarasota: What to Know First
CGI roof repair in Sarasota runs $295 to $1,850 for most jobs, depending on whether we’re replacing a weather seal, rebuilding a curb-mounted frame, or swapping out a fogged or cracked lite. We’re TruePane Windows & Doors, an independent CGI service provider, and we do this work on the homeowner’s schedule, not a manufacturer’s warranty calendar. Most repairs take one visit. The estimate is free, and the quote you get on paper is the price you pay.
This page is for Sarasota homeowners who have CGI skylights, roof windows, or sloped glazing systems and need them fixed right, by people who understand how these units behave in Gulf Coast conditions. Whether it’s a leak that shows up after a summer squall or condensation between panes, we can tell you what’s actually wrong and what it will cost to fix. Call (941) 214-2069 and a live person will answer.
How CGI Products Fail - and How We Fix Them
CGI builds a solid product, but no roof glazing is invincible in Sarasota. Salt air, hurricane-driven rain, and the daily thermal expansion of a copper roof or tile deck will eventually find the weak point. Here are the five failure patterns we see most often.
- Weather seal rot on older CGI skylights. The butyl rubber gasket between the glass and the aluminum frame dries and cracks, usually showing up as a small drip along the interior edge. We strip the old seal, inspect for frame corrosion, and re-glaze with a marine-grade polyurethane sealer that holds up in the salt air. If your skylight is still on the factory gasket, plan on doing this before the next hurricane season.
- Fogged insulated glass units in the CGI curb-mount series. Fogging between panes doesn’t mean the skylight leaks into your house. It means the soft-edge seal on the glass unit failed. On a CGI curb mount, we can often replace just the lite, keeping your existing curb and frame. That saves money compared to a full replacement and your roofline stays intact.
- Cracked lites in the CGI flat-glass roof window line. Wind-blown debris, a golf ball, or a rogue tree branch can crack the top lite. The water that follows usually comes later, when the membrane beneath the glass gets soaked. We don’t just replace the glass; we inspect the underlayment and the waterproofing around the curb. If water got underneath, we tell you before it becomes a ceiling stain.
- Condensation at the frame on metal-roof installs. Sarasota’s humid air hits a cool aluminum frame and the condensation runs down onto the ceiling. The frame’s thermal break is either missing or shot. We add a proper thermal barrier and verify the weep system is clear so water drains where it should.
- Leaks at the curb corners after roof work. When a roofer gets up on a roof to re-deck or replace shingles, the curb often gets lifted or the flashing gets bent. Water follows. We re-set the curb, re-flash, and re-caulk with a polyurethane product that actually adheres to both the PVC membrane and the aluminum.
Our CGI Roof Repair Process
Every CGI roof repair in Sarasota follows the same sequence, so you know what’s coming and when the job is done.
- 1
Call and diagnostic scheduling. You call (941) 214-2069. A live person answers. We ask where the water is showing up and what the skylight looks like from inside. We schedule a visit that works for you.
- 2
On-site inspection. Our technician gets on the roof and confirms the weak point before touching anything. If it’s a seal, we check for rot. If it’s a crack, we check the waterproofing under the frame.
- 3
Right-part decision. If the manufacturer’s part matches and is available, we use it. If an OEM gasket is backordered for three months, we tell you and quote a marine-grade aftermarket equivalent that we know holds up in salt air.
- 4
Repair work. We replace what’s failed, re-flash and seal the curb, and check the weep paths and fasteners. The work happens in one visit unless we uncover something that requires a second, and if we do, we call to explain before proceeding.
- 5
Water test and walkaround. We run a controlled water test at the repair point and show you the result. Then we walk the roofline with you, inside and out, so you see what we see.
- 6
Cleanup and warranty. We leave the roof and interior clean, and your 90-Day Done Right Promise is in writing before we leave. Both manufacturer and workmanship coverages are explained and documented.
What CGI Roof Repair Costs in Sarasota
Repair pricing in Sarasota varies with the job, but you can expect honest numbers, not a mystery bid at the end.
- Single weather seal replacement: $295-$450
- Fogged lite replacement, curb-mount CGI: $550-$950
- Cracked flat-glass lite with underlayment check: $650-$1,200
- Full curb re-flash and re-seal: $750-$1,850
- Frame thermal break retrofit: $500-$900
What moves the price is access (a two-story tile roof takes longer than a flat metal roof), whether the curb or frame has corroded, and whether we’re matching an OEM lite or ordering a custom configuration. Your quote is fixed on paper before work starts. No change orders, no surprises on the bill. Call (941) 214-2069 for a free estimate.
Why Sarasota Homeowners Call TruePane Windows & Doors for CGI Work
We’re not chasing the manufacturer’s authorization. We’re chasing the right repair. As an independent CGI service provider, we buy parts from the same suppliers the manufacturer’s network uses, and we don’t have to route your call through a warranty department before we can tell you what’s wrong. Dale Kessler started this company as a second-generation glazier, and he still walks jobs himself when the work is complicated. If the pane is not true, the job is not done.
Every job carries our 90-Day Done Right Promise. Both manufacturer warranty layers are registered in writing, with the durations stated, before the truck leaves the driveway. We show up in uniform, background-checked, and we measure every opening twice. We also work on PGT, CWS, ES Windows, and ECO Window Systems, so if your home has a mixed-brand roofline, one crew handles it. Call (941) 214-2069 and a live person answers. That has not changed in over 42 years.
FAQs
Sometimes. CGI’s residential warranty covers the original owner for a limited term, but a roof repair caused by installation error, substandard flashing, or consequential water damage is typically not covered. We can inspect and tell you honestly what the warranty likely covers before any work starts. Call (941) 214-2069 and we’ll walk you through what to check.
In most cases we can match the existing glass configuration and replace just the failed lite. The exception is if the frame is corroded or distorted, in which case re-glazing would fail quickly. We’ll show you the frame condition during the inspection, and we’ll quote both options if we think replacement is smarter.
We schedule emergency roof leaks as fast as we can get a technician to you, usually within 24 to 48 hours. For non-emergency work, we schedule around your availability. Call (941) 214-2069 and we’ll give you a straight answer on timing.
OEM parts come from CGI’s supply chain and match the original specification exactly. Aftermarket parts, like marine-grade polyurethane seals, sometimes outperform the factory gasket in Sarasota’s salt air. We always quote options on paper, with prices, so you decide. We don’t install cheap generic parts that fail in a year.
No. The quote you get in writing is the price you pay. The only exception is if we uncover a problem hidden behind the frame or curb that no inspection could have caught. If that happens, we stop, call you, explain, and get your approval in writing before spending another dime. No surprise line items.
For most seal and lite replacements, no permit is required. For structural curb work or modifications to the roof opening, we pull the permit and handle the inspection. Either way, we’ll tell you upfront what the job needs.
If you own a CGI product and the roof is leaking or fogging, call (941) 214-2069 and tell us where the water is showing up. We’ll ask the right questions, get you on the schedule, and fix it right the first time. That’s the only way we work.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.